1. The screen windows in the bedroom and living room only have some dust attached to them. You can remove the screen windows and rinse them with clean water. You can also spread a newspaper on one side, use a soft brush to remove the dust, and then turn over to clean the other side; When cleaning the kitchen screen, you can use some detergent or detergent, and just brush it clean with a brush.

2. If the stain is relatively stubborn, clean the screen window, take an appropriate amount of washing powder, a small amount of milk, and water, mix them together to make a cleaning solution. Dip a soft bristle brush in it and apply it to the screen window. After 5-8 minutes, rinse with clean water. After cleaning, the screen window will look like new. Flour can also be used. Due to the high surface tension of the flour particles, it can adsorb various oil stains. After wetting with water, the coarse fibers, starch, etc. in the flour will expand when they encounter water, providing a strong removal power for oil stains.

3. Some invisible screens are not good, but even if they can be removed, it takes a lot of effort. In fact, there is a good way to do it. You might as well try it. "Instead of putting down the screen window, pull it out a bit and wipe it a bit.". This way, the cloth is always at the root of the screen window, which can be wiped out easily with force.

4. Some families use a vacuum cleaner to clean the screen windows, and the method is relatively simple. Place a newspaper outside the screen window, so that the glass window outside the screen window can be used to fix the newspaper. Do not let the newspaper run around. If it is not possible, just hold it with your hand. Then use a vacuum cleaner to cling to the screen window and suck away dust and dirt bit by bit from the inside. The advantage of this method is that it is both convenient and clean, and it does not require water to ensure that the floor is dry.

5. When not in use, you can put the screen window into the mesh box. This also requires regular screen cleaning, while paying attention to the lubrication of the rails, and adding some oil to the positioner as appropriate. Once the yarn surface is damaged, it should be replaced in a timely manner.